To Next Page
C
Colleen TerrellAug 23, 2025
Why can't I navigate to Admin screens on Polycom VSX 7000 Conference System?
- HhchapmanAug 23, 2025
If you cannot navigate to the Admin screens on your Polycom Conference System because the System button is not displayed, press the button on the remote and select System at the end of the help message. Alternatively, access the system remotely using the system’s web interface, FTP, Telnet, or SNMP. From the web interface, you can add the System button back to the home screen by navigating to System Setup > Admin Settings > General Settings > Home Screen Settings, then select System. The change will take effect after you navigate away from the home screen and then back again on the system.
General
