Polycom VVX 300 - VVX 400 and VVX 410 Phones Hardware

To place a call using Hands-Free Speakerphone mode:
Do one of the following:
With the handset on-hook
1. From the idle screen, press the New Call key or press to obtain
dial tone.
2. Dial the number using the dial pad and press the Send key or wait for
the call to automatically connect.
With the handset on-hook
1. Dial the number using the dial pad.
2. Press or the Dial key
To place a call using the headset:
Do one of the following:
With the optional headset connected
1. From the idle screen, press the “New Call” key or press to obtain
dial tone.
2. Dial the desired number using the dial pad.
With the optional headset connected:
1. Dial the desired number using the dial pad.
2. Press
The phone starts suggesting a number you can select from
the recent call list as you dial.
Additional information on headsets can be found on page 48
of this guide.
13