Polycom VVX 300 - Inbound Caller ID; Ending Calls

Automatic Answer allows a call to be answered without touching the phone.
The incoming call still shows on the display and does provide the Answer
and Reject keys.
Enabling Automatic Answer:
1. Press > Settings> Basic> Preferences>
Auto Answer
2. Select Auto Answer SIP Calls
3. Select Yes
4. Press the Save key.
Disabling Automatic Answer:
1. Press > Settings> Basic> Preferences>
Auto Answer
2. Select Auto Answer SIP Calls
3. Select No
4. Press the Save key.
Inbound Caller ID
Caller ID Name and Number are presented on the screen of your phone
with each inbound call. If you are using a Simultaneous hunt group the
name of that hunt group will also be passed through to the display of your
phone.
Ending Calls
To end a call:
Do one of the following:
• Press the End Call key.
• If you are using a headset, press .
• If you are using the speakerphone, press.
• If you are using the handset, replace the handset on the receiver.
16