intensity and the Backlight Idle intensity decrease.
The Backlight On intensity applies for the following events:
•
Any key press
•
Hookswitch release
•
Incoming call
•
Ending a call, holding a call, resuming a call by the other party
•
A voice or instant message received
If you do not press any keys on the phone after 20 seconds of the
backlight turning on, the backlight dims (or changes) to medium in the
following cases:
•
A call is in progress
•
A call is on hold
•
There is an incoming call (ringing)
•
There is an outgoing call (ringing back)
•
Any menu shows on the display
In all other cases, the Backlight Idle intensity applies.
To modify the backlight intensity:
1.
Press
2. Select Settings > Basic > Backlight Intensity.
3. Select Backlight on Intensity.
4.
Select high, medium, or low and then Select save. The default level is
medium.
5.
Select Backlight Idle Intensity.
6.
Select high, medium, or low, and then press the Select soft key. The
default level is low.
7.
Select Maximum Intensity.
8.
Press the Down or Up keys to set the intensity level.
9.
Press and to return to the idle display.
Enabling the Headset Memory Mode
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press
2.
Select
Settings > Basic > Preferences > Headset... > Headset Memory...
3. Select Enabled to change the setting.
4.
Press
to return to the idle display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
44
To Next Page
Loading...
