To activate Headset Memory
Mode:
Press
twice.
The flashing headset icon on the graphic display or a flashing headset key
indicates that the headset mode is activated. If the
glows green an analog
headset is detected by the phone and in use. If the is glowing blue a USB
headset is detected and in use. If both an analog and USB headset
is in the phone, the phone will choose the USB by default. Select
Answer
to
receive a call will now connect to your headset automatically.
Selecting the Correct Headset for Electronic Hookswitch
This feature allows you to answer your phone when you are using a headset.
To select a headset that supports electronic hookswitch:
1. Press
2.
Select
Settings > Basic > Preferences > Headset > Hookswitch Mode
.
3. Select to select your headset, and then when prompted if you are sure,
Select yes.
4. This action will restart your phone.
Selecting the Ring Type
You can select different ring types to distinguish your phone from your
neighbor’s phone.
To change the incoming ring type:
1.
Press
.
2.
Select
Settings > Basic > Ring Type
.
3. Select the ring type you want to use.
4. To hear the selected ring type, Select the
Play
soft key.
5.
Press
to return to the idle display
.
For information on supported headsets to provide electronic hookswitch features for
placing, answering, and ending calls, go to www.polycom.com/support/voice and
enter “Headset Compatibility List” in the Knowledge Base text box or contact your
system administrator.
45
To Next Page
Loading...
