•
Ending a call, holding a call, resuming a call by the other party
•
A voice or instant message received
If you do not press any keys on the phone after 20 seconds of the
backlight turning on, the backlight dims (or changes) to medium in the
following cases:
•
A call is in progress
•
A call is on hold
•
There is an incoming call (ringing)
•
There is an outgoing call (ringing back)
•
Any menu shows on the display
In all other cases, the Backlight Idle intensity applies.
To modify the backlight intensity:
1.
Press
2.
Tap Settings > Basic > Backlight Intensity.
3.
Tap Backlight on Intensity.
4.
Tap high, medium, or low and then tap save. The default level is
medium.
5. Select Backlight Idle Intensity.
6. Tap high, medium, or low, and then press the Select soft key. The default
level is low.
7. Select Maximum Intensity.
8. Tap to Dow or Up in the bottom bar to set the intensity level.
9. Tap save to accept changes.
10.
Press and
to return to the idle display.
Enabling the Headset Memory Mode
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
44
To Next Page
Loading...
