Option 2: Connect Desk phones using your existing data network then
connect the phones to your computer
If you already have a computer using a wall data jack or router/switch
ports, unplug the computer from the network, then connect the phone
using the steps in Option 1. Plug your computer into the port on the back
of the phone labeled
3.
Connect Power to the Desk Phone
Use the included power cord and plug one end into the back of the phone
and the other end into the wall outlet. The phone will indicate that it is
configuring itself. Once the phone has finished its configuration, it is ready
to make and receive phone calls.
4.
Attach the Phone Base as a Desk Mount
a.
Align the base bracket with one of the three slots in the back of
the phone.
b.
Stick the base into the desired slot until it clicks in place.
51
To Next Page
Loading...
