G2000e/G3000e/G6000e User’s Manual Chapter 3: Operations and Settings
Set the bitmap size. When set as NONE, the bitmap would be in normal size;
When set as 300->600, the bitmap size would be enlarged by 1 time; When set
as 600->300, the bitmap size would be reduced by 1 time.
Options: NONE, 300->600, 600->300
Default: NONE
Set the size of the printout. When set as NONE, the print contents would be in
normal size; When set as X0.5, the print contents would be reduced by 1 time;
When set as X2, the print contents would be enlarged by 1 time.
Options: NONE, X0.5, X2
Default: NONE
Select corresponding RFID frequency range according to the RFID label
specification.
*Only available for 300dpi and 600dpi printers.
To Next Page
Loading...
