Power Measurement ION 8000 Series - Time of Use; Configuring Time of Use; Using Designer; Using ION Setup

Time of Use ION 8000 Series User Guide
Page 152 Chapter 13 - Revenue
Time of Use
The Time of Use module may only be important if you are using the meter in a
billing application (i.e. you are a power provider), as the module contains the
meter’s seasonal rate schedules. Typically, power consumers do not require Time
Of Use configuration.
See the ION Reference for more information on the Time of Use module.
Configuring Time of Use
Use ION software to change your meter’s Time of Use settings.
Using the Front Panel
You cannot configure Time of Use using the front panel.
Using ION Setup
The Time of Use Setup Assistant helps you configure the Time of Use module.
1. Open ION Setup and connect to your meter, using Basic Mode.
2. In the Setup Assistant, navigate to Revenue > Time of Use
3. Select a Time of Use program from the list (in this example, Sample TOU) and
click Edit.
4. Follow the Time of Use Wizard to configure your program. Click Send to save
the TOU program on your meter.
Using Designer
Open your meter in Designer and navigate to the Time-of-Use Setup Framework.
Right-click the Time of Use module to edit.