ION 8000 Series User Guide Switching to TEST Mode
Chapter 16 - TEST Mode Page 177
3. Select the TEST Mode radio button. You will be prompted for the ION Enterprise
user password. If meter security is enabled, you will also be prompted for the
meter password.
Use this screen to view and reset the registers that accumulate real-time data. For
more information see the Vista section of the online ION Enterprise Help.
Using Vista (hardware-locked meter)
You cannot place a hardware-locked meter in TEST mode using ION software. The
meter must be placed in TEST mode via the front panel. See “Switching to TEST
Mode” on page 175.
To Next Page
Loading...
