Configuring EtherGate Connections ION 8000 Series User Guide
Page 86 Chapter 6 - Communications
3. Scroll to Protocol and press Alt/Enter. Change the port’s Protocol setting to
EtherGate using the Up or Down arrow buttons.
NOTE
If you have the optional internal modem then COM2 is not available for EtherGate applications.
Using ION Setup
1. Run ION Setup and connect to the appropriate meter.
2. Select View > Setup Screens and double-click on “Setup Assistant” in the right
side of the Network Viewer.
3. In the Setup screens, select the Communications tab and then select Com1(or
COM2, depending on your meter’s options). Click edit and scroll to EtherGate.
Refer to the EtherGate technical note for complete details on configuring your
meter for EtherGate.
COM1 SETUP
BAUD RATE
RETURN
PROTOCOL
PROTOCOL
MODEMGATE
FACTORY
ETHERGATE
DEMAND SETUP
COM1 SETUP
COM2 SETUP
COM3 SETUP
SECURITY
FORMAT SETUP
DISPLAY SETUP
RETURN
8500 SETUP
BASIC SETUP
Press
Press
Press
Press
Ia
2401.1
kA
2951.3
kA
2291.7
kA
102.1
kA
Ib
Ic
In
18:30:00
1999.06.01 ABC Q1 NORM 5:00mEOI
Press and Hold
To Next Page
Loading...
