Data Logging ION 8000 Series User Guide
Page 140 Chapter 12 - Logging
Data Logging
The meter ships with a comprehensive data-logging configuration. Information
regarding the default logging capacity and default logging configuration can be
found in “Default Logging Capacity” on page 142.
To learn more about the data recorder modules in your meter, refer to ION Device
Templates at www.pwrm.com. This file lists all of the ION modules available in the
current version of your meter, and the total number of each module. It also shows
the ranges or options available for each module’s setup registers.
Configuring Data Logging
Use ION software to change your meter’s logging settings.
Using the Front Panel
You cannot configure Logging using the front panel.
Using ION Setup
The Logging Setup Assistant helps you configure meter data logging.
1. Open ION Setup and connect to your meter, using Basic Mode.
2. In the Setup Assistant, navigate to the Logging folder.
Use the two screens (Memory, Load Profile) to configure your logging settings.
To Next Page
Loading...
