Page 39
3 Templates and Firmware
Your meter comes installed with a pre-configured default template. This template
contains various frameworks which provide all the power measuring and
analyzing functionality of the meter. Templates and frameworks can be used
immediately without any user configuration (“right out of the box”). They can also
be customized, reconfigured, and pasted from one meter to another.
For more information on templates, frameworks and ION modules, see the
ION Reference.
Your meter’s operating system is known as firmware. When newer firmware is
available for your meter, simply upgrade to the latest version for all the added
features and functionality.
In this chapter
Factory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Factory Module Settings .......................................................................................40
How to TAG Your Meter ......................................................................................40
Restoring the Factory Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Using Designer ...................................................................................................... 41
Using ION Setup ................................................................................................... 42
Upgrading Your Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
To Next Page
Loading...
