Configuring Advanced Meter Security ION 8000 Series User Guide
Page 62 Chapter 5 - Security
Entering an advanced security user name and password
When you attempt to view data or make a change to a meter that has advanced
security enabled, you are prompted for a user name and password.
.
1. Enter the valid Advanced security user name.
NOTE
User names are fixed as USER1 through to USER16.
2. Enter the appropriate password and click OK.
Configuring advanced security using ION Setup
If you are using ION Setup software follow the instructions below.
1. Launch ION Setup with Supervisor access.
2. Connect to the meter you want to configure with Advanced security.
3. Once connected, double-click the Setup Assistant in the right-hand column of
the Network Viewer.
4. Select the Security heading in the left-hand column of the Setup Assistant. Click
the Advanced Setup tab.
5. Click the SOP1 Enable Advanced Security listing. Click Edit.
To Next Page
Loading...
