29
www.powerbox-systems.com
• Text
At the Text option you can enter any text, which is then spoken by the TTS system, for example, by a switch.
• Telemetry short
The selected telemetry value is spoken together with its unit. The message can be triggered by switch activation, at regular
intervals, or by a change in the value.
• Telemetry medium
The sensor name and the value - without unit - is spoken.
• Telemetry all
The sensor name, sensor value and unit are spoken.
• Timer
As of Version 2.80 it is possible to select the speech output of timer messages in the Timer menu.
3.10.2. Value
If you want the system to speak free text or a telemetry value, at this point you should select the sensor value which is to act as
data source.
• Text
In the case of free text, you can enter up to 64 characters here.
• Telemetry
If Telemetry was selected as the source, you can choose here what value should be spoken.
3.10.3. Control
At this point you can select a transmitter control for activating
the speech output, or select permanently ON/OFF.
To Next Page
Loading...
Need help?
General