30
PowerBox-Systems − World Leaders in RC Power Supply Systems
3.10.4. Replay
In this menu you can activate single and repeated statements, or a statement in response to a change in a value.
Depending on your choice, you have the option of setting the interval period or the extent to which the selected telemetry value
must change in order to activate speech output.
The Once option is used if you wish to have a timer or a tele-
metry value spoken when a switch is operated.
The Interval option is used to set a fixed time after which the
output is to be spoken at regular intervals.
The Value change option is only available if a telemetry value
has been selected as source. Here you can set a threshold
value; the telemetry value must change by this amount in order
to trigger the speech output.
3.10.5. Test
This button has two functions, as can be seen by the small triangle at top right:
• Function 1
If operated briefly, the parameters entered on the left are played back once; this only works if the fixed value ON is entered as
Transmitter control.
• Funktion 2
If you keep the button pressed, you can change the voice in this menu. First you will see the voices which are available for your
set language. Pressing on the globe at bottom right displays all the voices together with the associated language. This enables
you, for example, to have English expressions spoken using an English voice, even though the ATOM is set to German.
To Next Page
Loading...
Need help?
General