Page 11 of 49 Instructions/Parts list Multi-Dumper MCE400 updated: 04.2021
Cleaning and long-term storage
Lower the tray / buildup and switch off the machine using the key switch. Remove dirt from the outer
parts of the entire machine, especially the motor, the area of the batteries and the control box.
• IMPORTANT: The machine can be washed with mild detergent and water. Do not clean the
machine with a high-pressure cleaner. Avoid using water, especially near electrical components.
• Check all screws, nuts and bolts and tighten them if necessary. Repair or replace damaged or
defective parts.
• Store the machine in a clean, dry garage or storage room. Turn off the machine using the key
switch and disconnect the batteries.
DANGER! There is a risk of a short circuit! Secure the contacts of the cables / batteries with
suitable insulation!
• The batteries must always be stored dry, protected from frost and out of the reach of
potential sources of fire.
• The batteries must not get into the hands of children.
To Next Page
Loading...