Page 6 of 49 Instructions/Parts list Multi-Dumper MCE400 updated: 04.2021
Safe work area
• Check the working area before each use. Keep the working area clean, dry, free of clutter and
well-lit. Unclear, wet or dark working areas can lead to injuries. Using the product in confined
work areas can create a dangerous proximity to cutting and rotating parts.
• Do not use the product if there is a risk of fire or explosion, e.g. in the presence of flammable
liquids, gases or dust. The product can generate sparks which can ignite flammable liquids,
gases or dusts.
• Do not allow the product to come into contact with electrical power sources. The device is not
isolated and the contact causes an electric shock.
• Keep children and bystanders away from the work area while you are operating the device. Do
not let children work with the product.
• Pay attention to all power lines, circuits, water pipes and other mechanical hazards in your work
area. Some of these hazards may be out of your sight and may result in personal injury and/or
property damage in the event of contact.
Personal safety
• Always be vigilant when operating the device, pay attention to what you are doing and use your
common sense. Do not use the device if you are tired or under the influence of drugs, alcohol
or medication. A moment of carelessness during operation can lead to serious injuries.
• Wear appropriate clothing. Do not wear loose clothing, hanging items or jewelry. Keep hair,
clothes and gloves away from movable parts. Loose garments, jewelry or long hair can get
caught in moving parts. Vents on the tool often cover moving parts and should be avoided.
• If necessary, wear the appropriate protective clothing. Safety glasses that are ANSI Z87.1
compliant with side protection or use a face mask if necessary. Use a dust mask in dusty working
conditions. In addition, non-slip safety shoes, safety helmets, gloves, hearing protection and if
necessary, dust collection systems should be used. This applies to all people in the workspace.
• Don't overestimate yourself. Always make sure you are safe and balanced.
• Remove screwdrivers or wrenches before turning on the device or connection to a power supply.
A screwdriver or wrench that hangs on a rotating part of the tool can cause injury.
• Remove screwdrivers, wrenches and other tools before switching on the device or connecting
it to the power supply. A screwdriver or wrench etc. that comes into contact with a rotating part
of the machine can cause injuries.
To Next Page
Loading...