Page 17 of 49 Instructions/Parts list Multi-Dumper MCE400 updated: 04.2021
Cleaning the machine
IMPORTANT: If the engine is operated with too much dirt, grass or other debris covered, it can lead to
overheating, a corresponding loss of performance and long-term damage.
1. Park the machine on a level surface, lower the tray / buildup and switch off the machine using
the key switch.
2. Check the battery holder for dirt and remove it.
DANGER! There is a risk of electric shock and short circuit!
3. Dirt can accumulate in the engine area. Before each use, clean the dirt with a brush or a blower.
IMPORTANT: It is better to blow out dirt than to wash it out. When water is used, keep it away from the
electrical equipment.
IMPORTANT: Do not use a high-pressure cleaner. High-pressure cleaning can damage the electrical
system.
Inspection before take-off
It is very important to visually inspect the machine before commissioning. This inspection should include:
• Check all stickers and warning signs for damage.
• Check the battery level and charge if necessary
• Check the machine for damage or loose fasteners.
• Carry out daily visual checks.
• Make sure that the control levers automatically return to their neutral position!
• Check all parts, screws, brackets and equipment of the machine for correct seating, functionality
and condition.
To Next Page
Loading...