EasyManua.ls Logo

PowerPac MCE400 - Special Precautions During Operation

Default Icon
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 8 of 49 Instructions/Parts list Multi-Dumper MCE400 updated: 04.2021
Special precautions during operation
Do not allow anyone to stand on or / on any part of the machine, including the tray / buildup.
Only operate the machine if you hold onto both handles.
Pay attention to where you are going. Always keep an eye on your surroundings.
Avoid sudden maneuvers, especially on uneven and slippery ground.
Only lift the tray / buildup when the machine is leveled.
If you leave the device unattended, always lower the tray / buildup. Always switch off the
machine when you leave it.
Drive more slowly before turning. Tight turns can lead to losing control of the machine.
Switch off the machine using the key switch before making any settings on the machine.
Disconnect the batteries before working on the electrical system.
Do not operate the machine on or near embankments. Look for ditches, holes, etc., and watch
out for traffic near roads.
Only work in daylight or in good artificial lighting.
The device must not be operated under the influence of alcoholic beverages or medication.
Take special care when loading and unloading the device onto a trailer or truck.
Do not touch any devices or accessories that can get hot during operation. Allow the device to
cool down before performing maintenance work or adjusting settings.
Do not let children play on or near the device.
Do not place any bulky objects in the tray that could impair the view from the driving position.