Page 7 of 49 Instructions/Parts list Multi-Dumper MCE400 updated: 04.2021
Use and care
• Do not overload the product. Products are safer and perform better when used for their intended
purpose. Plan your work and use the right product for each task.
• Check the device for damaged parts before each use. Carefully check that the product is
functioning properly and is fulfilling its intended function. Damaged or worn components must
be replaced immediately. Never operate the device with a damaged or loose part.
• Never operate the machine with a defective key switch. Machines that cannot be switched off
with the key switch are dangerous and must be repaired before use.
• Before working on the machine, switch off the machine using the key switch. When working on
electrical components of the machine, always disconnect the batteries, otherwise there is a risk
of a short circuit. Such preventive safety measures reduce the risk of the device starting up
accidentally and prevent serious personal injury and damage to property.
• Store the product when not in use. Store in a dry, safe place out of reach of children. Check the
machine and attachments before storage and before re-use to ensure that it is in excellent
working condition.
• Use only attachments that are recommended by the manufacturer for use with your product.
Attachments suitable for a product may cause injury when used with another machine.
• Ensure that the protective devices are present and functional. Never operate the device without
a protective device.
• Do not let the machine run unattended.
IMPORTANED:
If possible, the batteries should be recharged after each use
and every 2-3 weeks when not in use.
To Next Page
Loading...