Page 12 of 49 Instructions/Parts list Multi-Dumper MCE400 updated: 04.2021
Commissioning
The MCE400 is operational in the delivery state (see First use).
Remove the packaging film and check the machine for transport damage.
Avoid driving against edges, steps or ledges at maximum speed.
The steering wheels (Fig.: 1, Fig.: 2) are locked on delivery and must be unlocked before use.
DANGER! The release of the mechanical brake, see “Parking brake
(Fig.: 8) “on the engine leads to a travel lock!
Releasing the brake and moving the MCE400 in the event of a drive failure may only be
carried out when it is unloaded! In any case, pay attention to the own weight of the
MCE400 when working on a slope! Driving is not possible in this state, but there is a
risk of the Multi-Dumper MCE400 rolling away by itself. An empty battery leads to the
motor being switched off. Therefore, the batteries must be charged according to the
topic "Operating hours counter / battery display" as soon as the battery display shows
"charge battery".
Fig.: 1 – Steering wheels locked
Fig.: 2 – Steering wheels unlocked
To Next Page
Loading...