Page 5 of 49 Instructions/Parts list Multi-Dumper MCE400 updated: 04.2021
Introduction
• Read and follow all instructions. Not following the instructions may result in serious injury or
damage to property.
• The warnings and hazards in this guide cannot capture all situations and conditions that may
arise. Use common sense and caution when using the device. Always be environmentally
conscious and pay attention to safe and responsible use of the device.
• Do not allow anybody to operate or start-up the device until they have read this manual and
have a thorough understanding of how it works.
• Do not make any changes to this product. Unauthorized modifications may affect the function
and/or safety of the product and affect the life of the product. This product is designed for specific
applications.
• Use the right tool for all jobs. DO NOT attempt to use small equipment to perform jobs that
require large tools. There are specific applications this device was designed for. The product is
safe and does a great job when used for the capacities for which it was designed. DO NOT use
the device for purposes for which it is not intended.
Labelling
The machine is marked with a special label that says:
- CE marking in accordance with the provisions of Directive 98/37 / EC, Annex II, Part A
- year of production
- Name and address of the manufacturer and legal representative in Europe
- Type of Machine: serial number or register number
- Technical data regarding the machine
For all kind of request and question make reference to PowerPac Baumaschinen GmbH!
Complete or partial reproduction (in any form or on any medium, including registration and
photocopy) is absolutely prohibited without the written consent of PowerPac Baumaschinen
GmbH. If these operating instructions are lost or partially destroyed, ask PowerPac
Baumaschinen GmbH for a complete copy suitable for your machine.
Be careful when using the machine.
Read the instruction manual carefully before use.
DO NOT OVERLOAD! Max. 400 kg load
To Next Page
Loading...