Page 18 of 49 Instructions/Parts list Multi-Dumper MCE400 updated: 04.2021
Characteristics
Description of the machine
The Multi-Dumper MCE400 is built, designed, manufactured, tested and sold by PowerPac
Baumaschinen GmbH.
It leaves the factory with the intention of transporting heavy loads through rough terrain without any
problems. By operating the appropriate levers and switches, the speed of the machine can be
continuously regulated and switched between forward and reverse travel. Depending on the equipment
variant, the tray or buildup is supported pneumatically or tipped electrically via a switch.
The main features of this machine are: simplicity, robustness, reliability.
The small size and the special construction of the frame allow it to be used in any terrain and guarantee
safety, stability and reliability over time. A quick check in the morning guarantees you a loyal and safe
work colleague for the whole day. The control levers are positioned so that you have a good view in
every position and the operator always has full control of the machine.
Fig.: 6 – MCE400 ISO view without buildup (drawing may differ slightly
from the original)
To Next Page
Loading...