Powerware 9125 - Page 31

Installation
25
Powerware
®
9125 User’s Guide (2500–3000 VA) : Rev B www.powerware.com
6. Place the EBM cabinet upside down so that the right end of the
unit is accessible (see Figure 7).
Figure 7. Installing EBM Pedestals
7. Position two of the pedestals over the edge of each cabinet so
that the weight of the unit is evenly distributed. Secure the
pedestals with the screws provided in the accessory kit.
8. Carefully position the cabinets upright with the air vents at the
top(seeFigure8orFigure9).
Air Vents
Figure 8. Pedestals with Two Cabinets