PR4000 9mt 4x1000W METAL HALIDE
TL073-11-02-03
01-02-2011
9.6 FLOODLIGHT
Lamp
Metal halide
Power
4x1000 W
Degree of protection
IP 66
Constructor material of the body
Die-cast aluminium
Constructor material of lampholder
Ceramic
Reflector
Polished and anodized aluminium
99,85
Cable gland
Stainless steel
Optical case opening system
Stainless steel clips
Dimensions (L x H x D mm)
404 x 260 x 328
The floodlight is provided by tempered glass and silicone seals. Closing hooks and external nuts
and bolts in stainless steel. The casing’s protection against corrosion is ensured by Alodine 1200
chromate treatment and polyester powder coating for outdoors in graphite grey finishing. The
frame is equipped with special drains to prevent water from accumulating.
To Next Page
Loading...
