PR4000 9mt 4x1000W METAL HALIDE
TL073-11-02-03
01-02-2011
13.9 REMARKS
It is important that the operator will be always careful at every eventual disadvantage had at usury
or breakdown.
It is necessary that the use of the lighting tower will be effected from expert personnel, careful at
eventual structural disadvantage, seen the size of the structure.
It is advised to do always a visual check and general at every use, above all at those parts always
in movement and subjected at usury.
The expert user must not permit to anybody to stay near to the lighting tower, when it is in
function.
Let always wide space round to the lighting tower.
It is recommended to place the base the most possible in plan in order to facilitate the regulation of
the stabilizers (make reference to the spirit level placed on the frame (Fig. 1).
(Fig. 1)
It is also recommended to place the structure in a stable place, verifying the consistence of
the earth to allow a sure support to the stabilizers.
Pull the hand brake if the tower is supplied of undercarriage for towing.
It is allowed the use of the lighting tower only at a qualified staff.
Before to use the lighting tower it is recommended to the authorised staff to consultate all
warnings and dangers described into this manual.
The manufacturer is not responsible of any damage at things or person, in consequence at the
inobservance of safety norms.
Before any operation on the machine ensure yourself that the lighting tower is not feeded and that
there are not any parts in movement.
For the electrical connection between the floodlights and the command panel of the lighting tower
it has been used a turn cable 11G2,5 mmq placed to the inside of a cylinder that allows a
comfortable sliding.
To Next Page
Loading...
