PR POWER PR4000 - Engine Maintenance

PR4000 9mt 4x1000W METAL HALIDE
37
TL073-11-02-03
01-02-2011
14. ENGINE MAINTENANCE
In order to preserve the engine performance strongly suggests following the maintenance
operations and the maintenance schedules reported in the engine “Operator’s manual” at chapter
“MAINTENANCE”, in order to avoid troubles and a consequent power loss of generating set.
PERIODICITÀ DELLA MANUTENZIONE
SERVICE INTERVALS
Interval
Item
Every 50 hours
Check of fuel pipes and clamp bands
@
Replacement of fuel pre-filter
First change of engine oil
Every 100 hours
Cleaning of air cleaner element
*1
@
Cleaning of fuel filter
Check of battery electrolyte level
Check of fan belt tightness
Every 200 hours
Check of radiator hoses and clamp bands
Replacement of oil filter cartridge
@
Replacement of engine oil
Check of intake air line
@
Every 500 hours
Removal of sediment in fuel tank
Cleaning of water jacket (radiator interior)
Replacement of air cleaner element
Every 800 hours
Check of valve clearance
Every 1500 hours
Check of fuel injection nozzle injection pressure
*3
@
Every 3000 hours
Check of injection pump
*3
@
Check of fuel injection timer
*3
@
Every year
Replacement of air cleaner element
*2
@
Check of electric wiring
Every 2 years
Replacement of radiator coolant
Replacement of radiator hose
Replacement of fuel pipes
*3
@
Replacement of intake air line
*4
@
*1 Air cleaner should be cleaned more often in dusty conditions than in normal conditions.
*2 After 6 times of cleaning
*3 Consult your local Kubota Dealer for this servive.
*4 Replace only if necessary.
@ The items listed above are registered as emission related critical parts by Kubota in the U.S.
EPA nonroad emission regulation. As the engine owner, you are responsible for the
performance of the required maintenance on the engine according to the above instruction.
Please see the Warranty Statement in detail.
We report here the operations of ordinary engine’s maintenance, for other operations make
reference to “Owner’s manual” of the engine, chapter “MAINTENANCE”.
The hour meter esclusively indicates the hours of working of the engine because it only works with
the engine in motion. It could be a reference for the periodic ordinary and extraordinary
maintenance of the machine.