PR4000 9mt 4x1000W METAL HALIDE
TL073-11-02-03
01-02-2011
11.2 EMERGENCY STOP BUTTON AND EARTH CLAMP
Items Description
18 Earth clamp connection
19 Emergency stop button
Connect the unit to the earth, through the clamp (18).
The unit must be connected to earth using a copper cable with a minimum cross-section of 6 mm².
The manufacturer is not responsible for any damage caused by failure of the earthing.
Make sure that the emergency stop button (19) is rearmed. If it doesn’t, turn the grip handle in
clockwise direction.
In emergency case it is possible to stop the generating set by pressing the stop button (19).
To Next Page
Loading...
