PR POWER PR4000 - Change Engine Oil

PR4000 9mt 4x1000W METAL HALIDE
29
TL073-11-02-03
01-02-2011
47
48
49
12.6 CHANGE ENGINE OIL
Items
Description
47
Engine oil drain cap
48
Manual pump for extracting the oil from the engine
49
Wiggins Fast Fuel (*)
For the oil change it has been prearranged a manual pump.
Remove the discharge cap (47) from the pump and apply a rubber hose (not supplied) to the top
of it, place the hose out of the frame of the machine, introducing it in a small basin. Unscrew the
oil cap and discharge the oil pumping it.
WARNING: after using the pump, screw the cap very well and check anyway the correct
tightening before each engine starting.
Contact with engine oil can damage your skin. Put on gloves when using engine oil. If you come in
contact with engine oil, wash it off immediately.
For know the type of oil to use in your motor, make reference to the Kubota engine owner’s
manual.
Change oil (4,5 l oil sump capacity) after the initial 50 hours of operation and every 200 hours or 1
year thereafter.
Do not discharge polluting liquids in the atmosphere.
If the machine has to be stopped for a long period (more than one year), we suggest to keep the
oil into the engine in order to avoid oxidizing effects.
Up to 25° C
SAE 30 - SAE 10W-30 - SAE 10W-40
Between 0° C and 25° C
SAE 20 - SAE 10W-30 - SAE 10W-40
Down to 0° C
SAE 10W - SAE 10W-30 - SAE 10W-40
(*) Note: The Wiggins Fast Fuel is an option only.