EasyManua.ls Logo

PR POWER PR4000 - Troubleshooting Guide; Main Troubles

PR POWER PR4000
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PR4000 9mt 4x1000W METAL HALIDE
47
TL073-11-02-03
01-02-2011
16. TROUBLESHOOTING GUIDE
Listed below are the most common troubles that may occur during use of the lighting tower and
possible remedies.
If the engine did not have to work correctly, we suggest to follow the maintenance operations and
the maintenance schedules reported in the engine “Operator’s manual” at chapter
“MAINTENANCE”, in order to find and to eliminate the cause of the trouble.
16.1 MAIN TROUBLES
FAULT
Turning the starting key in ON position, no signal lamps ignites and the starting motor does not
work.
CAUSE
The battery is disconnected.
REMEDY
Open the door and connect the battery.
CAUSE
The battery is discharge.
REMEDY
Recharge the battery.
CAUSE
The battery is defective.
REMEDY
Replace the battery.
CAUSE
Steerg lock is failure.
REMEDY
Replace the steerg lock.
CAUSE
The starting motor does not work.
REMEDY
Contact Kubota assistance centre for a check.

Table of Contents

Related product manuals