PR4000 9mt 4x1000W METAL HALIDE
TL073-11-02-03
01-02-2011
CAUSE
The emergency stop button is pressed.
REMEDY
Check that the stop button is reamed. It if doesn’t, turn the grip handle in clockwise direction.
CAUSE
There are many disconnected cables in the electrical system.
REMEDY
Check visually the electrical system to find the disconnected cables (make reference to the wiring
diagram.
FAULT
• The starting motor works but the engine does not start.
CAUSE
Possible lack of fuel in the tank.
REMEDY
Refuel the machine.
CAUSE
Fuel filter dirty.
REMEDY
Replace the filter.
CAUSE
The fuel pump does not work.
REMEDY
Check the electrical connection of the pump and eventually contact a Kubota assistance centre for
a check.
FAULT
• The starting of the engine is difficult and there is a insufficient rendering.
CAUSE
The element air cleaner is dirty.
REMEDY
Clean up the element and eventually replace it.
To Next Page
Loading...
