Manual Predia Touch Pro
11
Functions of Remote Controller
1. On or standby
2. Mute
3. 0--9: Select TV channel or enter number
4. Open the Android home page.
5. Go back or return to the parent menu.
6. Show or hid menu.
7. Show or exit from the list of signal sources.
8. Enable Alone mode.
9. Freeze.
10. Up/Down/Left/Right direction buttons
11. Conrm.
12. Capture screenshots.
13. Show the current signal source. You cannot show it in Android.
14. Adjust screen displaying.
15. Open WIFI on the computer.
16. Change the display mode.
17. Turn to the previous page on white board software and PPT.
18. Turn to the next page on white board software and PPT.
19. Open white board software.
20. Switch over to VGA signal source.
21. Switch over to HDMI signal source.
22. Switch over to OPS computer signal source.
23. Zoom up and down.
To Next Page
Loading...
