Overview Getting
Started
Controls and
Connections
Cascading
Units
Technical
Information
5 TECHNICAL INFORMATION PreSonus
™
FireStudio
™
Mobile
60
Overview Getting
Started
Controls and
Connections
Cascading
Units
Technical
Information
5.1 Troubleshooting
5.1 Troubleshooting
Many technical issues can arise when converting a
standard computer into a digital audio workstation
(DAW). PreSonus can only provide support for issues
that directly relate to the FireStudio Mobile interface
and Studio One Artist software. It may be necessary
to contact the manufacturer of the computer,
operating system, and third-party DAW software to
obtain additional technical support. PreSonus does
not provide support for issues regarding operating
systems, additional hardware, or non-PreSonus
software. Please check our Web site, www.presonus.
com, regularly for software information and updates,
firmware updates, and technical support. You also
can get technical assistance by calling PreSonus at
225.216.7887, Monday through Friday, between the
hours of 9 a.m. and 6 p.m. Central Time. PreSonus
Technical Support can also be contacted during the
same hours via email at techsupport@presonus.com.
Pops and Clicks
Pops and clicks in your input or playback audio
are typically caused by momentary losses of
synchronization between the FireStudio Mobile and
its clock source. This can be due to a FireWire card
that is not suited for FireWire audio devices or to a
lack of CPU power or available memory. Try closing
all unnecessary programs, increasing the buffer
size in the Universal Control, and optimizing your
operating system for audio.
Pops and clicks exclusive to the digital inputs or
outputs are typically caused when the FireStudio
Mobile is not digitally synced to the external digital
device. If this is the case, ensure your FireStudio
TECHNICAL INFORMATION
To Next Page
Loading...
