4-48 Controls and Instruments
PA-1652 Operator's Manual H3-45 Coach
and press Enter/Select button.
4.
Use the scroll wheel (rocker type) to
select the appropriate axle.
5.
Press the Application Tray button.
6.
Use the scroll wheel (rocker type) to
select the PLACARD and then
press Enter/Select button.
7.
Use the scroll wheel (rocker type) to
adjust the target pressure and then
press Enter/Select button.
CRUISE CONTROL
The cruise control allows you to cruise the vehicle
at a desired speed over 30 mph (50 km/h) without
having to use the accelerator pedal.
TURNING THE SYSTEM ON
To operate the cruise control, press the CC
button located on the left- hand steering wheel
keypad to turn ON the system. The Cruise
Control "ON" status pictogram will then appear in
the DID. You can now set the vehicle at a desired
cruising speed. To turn off the system, press the
CC button.
FIGURE 36: CRUISE CONTROL "ON" STATUS
PICTOGRAM (WHITE)
NOTE
The cruise switch and RESUME button do not
operate at speeds below 30 mph (50 km/h).
FIGURE 37: CRUISE CONTROL BUTTONS
(1) ON/OFF cruise control toggle (CC button).
(2) Cancel / Resume set speed.
(3) Increase speed (rocker type button).
(4) Set. Select current speed as set speed (push
functionality).
(5) Decrease speed (rocker type button).
To Next Page
Loading...
Need help?
General
