9-18 Technical Information
PA-1652 Operator's Manual H3-45 Coach
l Certified according to Provincial, State and
Federal Safety standards (Canadian and
US) BMCSS, FMVSS and CMVSS.
l Other applicable certification labels are
affixed to the component.
DOT CERTIFICATION PLATE
This certifies that vehicles manufactured by
Prevost comply with all Federal Motor Vehicle
Safety Standards at the time of manufacture.
Information such as the date of manufacture,
model year, gross vehicle weight rating, tire types
and inflation pressure is also etched on this plate.
The DOT certification plate is affixed behind the
driver’s seat.
FIGURE 10: DOT CERTIFICATION PLATE
EPA ENGINE LABEL
The emissions certification label affixed in the
engine compartment certifies that the engine
conforms to federal and any state exhaust
emissions regulations.
FIGURE 11: EPA CERTIFICATION LABEL
VEHICLE IDENTIFICATION NUMBER
(VIN)
FIGURE 12: VEHICLE IDENTIFICATION NUMBER (H3
SERIES)
The Vehicle Identification Number is stamped on
the DOT certification plate and also on a plate
located on the windshield frame pillar (driver's
side). The VIN is visible from the outside of the
vehicle. Make sure the correct vehicle
identification number is given when ordering
replacement parts. Using the VIN when ordering
parts will facilitate processing.
NOTE
Record the VIN in the vehicle documentation
and keep with company records. The VIN will
normally be used for vehicle registration,
service reference needs and for obtaining
vehicle insurance coverage.
To Next Page
Loading...
Need help?
General
