Primera LX500 User Manual

Hardware and Software Setup 9
Through Hole Labels
If you are using card stock or label stock that has a hole punch
or a notch to identify a transition from backing to label, you
can adjust the Sensor Bar to position it over the identifying
mark.
To adjust the sensor position use a pen to move the slide bar to
the correct postion.
Center
of Circle
1 1/8”
1/2”
Center
of Hole
Through-Hole LabelsCircular Labels

Primera LX500 Specifications

General

Print Method	Inkjet
Max Print Width	4.25 inches
Interface	USB 2.0
Max Print Length	24 inches
Print Speed	Up to 2.5 inches per second
Ink Cartridge	Single CMY
Operating System Compatibility	Windows, Mac
Media Width	4.25 inches
Media Sensing	continuous