Primera LX500 User Manual

Hardware and Software Setup 11
1. Open the Top Cover of the printer.
2. Press the Ink Button on the printer.
3. The Cartridge Carrier will align itself to the center of the
print area.
4. Press the Cartridge Cover Release to open the Cartridge
Holder. Remove the cartridge (if installed).
5. Remove the new Cartridge from its packaging. Be sure to
remove the protective tape covering the copper contacts.
6. Replace/install the cartridge copper end first.
Remove tape
Power
Ink
Ink Load/Feed Unload

Primera LX500 Specifications

General

Print Method	Inkjet
Max Print Width	4.25 inches
Interface	USB 2.0
Max Print Length	24 inches
Print Speed	Up to 2.5 inches per second
Ink Cartridge	Single CMY
Operating System Compatibility	Windows, Mac
Media Width	4.25 inches
Media Sensing	continuous