16 A26361-K878-Z102-2-7619
Safety Important Notes
Modules with electrostatic-sensitive components
Systems and components that might be damaged by electrostatic discharge
(ESD) are marked with the following label:
Figure 1: ESD label
When you handle components fitted with ESDs, you must observe the following
points under all circumstances:
● Remove the power plug from the power socket before inserting or removing
components containing ESDs.
● You must always discharge yourself of static charges (e.g. by touching a
grounded object) before working.
● The equipment and tools you use must be free of static charges.
● Use a grounding cable designed for this purpose to connect yourself to the
system unit as you install components.
● Do not touch any exposed pins or conductors on a component.
● Place all components on a static-safe base.
I You will find a detailed description for handling ESD components in the
relevant European or international standards (EN 61340-5-1,
ANSI/ESD S20.20).
Other important points:
● When cleaning the device, please observe the relevant notes in section
“Cleaning the Server” on page 53.
● Keep this Operating Manual safety and all additional documentation
(e.g. Technical Manual, CD) together with the device. All documentation
should be included if the device is passed on to a third party.
To Next Page
Loading...
