A26361-K878-Z102-2-7619 27
Hardware Installation Installing/Removing the Server into/from the Rac
4.3.2 Necessary parts
For mounting the server into the appropriate rack the following parts are
available (figure 3 and/or figure 4):
– support bracket (a)
– one left and one right telescopic rail (a/b) (assembled)
– ten plugwashers (c)
Figure 3: Necessary parts for PRIMECENTER Rack and DataCenter Rack
Figure 4: Necessary parts for Classic (19-Inch) Rack
a
b
c
a
To Next Page
Loading...
