2 A26361-K878-Z102-2-7619
Overview of the Documentation Introduction
Concept and target group of this manual
This operating manual describes how to install and how to operate your server.
This manual is intended for those responsible for installing the hardware and
ensuring that the system runs smoothly. The manual contains all the information
required for installing and operating your PRIMERGY RX200.
To understand the different expansion options it is necessary to have a
knowledge of hardware and data transmission, as well as basic knowledge of
the operating system used.
Additional server documentation
To the PRIMERGY RX200 documentation set belong the following additional
manuals:
– “Safety and Ergonomics” manual (print version delivered together with the
system, PDF file available on the ServerBooks CD)
– “Warranty” manual (print version delivered together with the system, PDF file
available on the ServerBooks CD)
– Technical Manual for the system board D1570 (PDF file available on the
ServerBooks CD)
– „D1570 Setup Utility for RX200“ (PDF file available on the ServerBooks CD)
– “ServerStart Bundle“ includes the ServerStart CD, the ServerBooks CD and
the print version of the manual „ServerStart Bundle“. The PDF file of the
manual is also available on the ServerBooks CD.
– Quick Installation Guide „AcceleRAID 160 PCI to UItra 160 SCSI RAID
Controller“ (PDF file available on the ServerBooks CD)
– Installation Guide „AcceleRAID 160 PCI to UItra 160 SCSI RAID Controller“
(PDF file available on the ServerBooks CD)
Further sources of information
– technical manual for the corresponding rack
– manual for the monitor
– manual for ServerView server management
– manual for the remote test and diagnostic system RemoteView
– documentation for the boards and drives
– operating system documentation
– information files of your operating system
(see also “Related Publications” on page 69).
To Next Page
Loading...
