Attachments
Establish operational readiness of the attachments
The operational readiness of the attachments must be expressly activated so that the attachments
cannot be inadvertently set in motion by the engine.
The operational readiness of the attachments can only be switched on under the following conditions:
■ The engine is running.
■ Both cab doors are closed.
■ The Emergency OFF switch is released.
After the following situations, the operational readiness of the attachments is switched off automatical-
ly and must be switched on again:
■ The engine has been switched off.
■ One of the cab doors has been opened.
■ The Emergency OFF switch has been pressed.
■ Use rocker switch (2) on the control con-
sole to activate/deactivate the operational
readiness of the attachments:
□
Press rocker switch upwards = op-
erational readiness of attachments
ON
□ Press rocker switch downwards = op-
erational readiness of attachments
OFF
Front blade
Adjusting the park pusher frame
CAUTION
Pinch point hazard
The roll cylinder is heavy, install a support before removing the holding pin.
►
Use the appropriate tools to manupulate the cylinder and avoid back injuries
Operating and Maintenance Manual
Snow groomer BISON
122
(255)
9 - Attachments
BISON 908930245 - 30367
9
9.1
9.2
9.2.1
To Next Page
Loading...