Prinoth BISON X - Lowering the Drivers Cab

5. Press on the upper part of the push-button
(1): the driver's cab is unlocked and tilts to
the front automatically.
1
6. Once the cab is tilted, install the safety rod
(1) to secure the cab. Compress safety rod
spring to unlock the device and pivot it to-
wards the accessory support frame.
1
1
7. Insert the free end of the safety rod into
the holding block (1) of the accessory sup-
port frame.
1
1
Lowering the driver's cab
DANGER
Risk of tipping
An unsecured driver's cab can tilt forward while the snow groomer is moving.
►
Check the driver's cab's locking status after lowering it.
► Only move the snow groomer if the driver's cab has been secured.
Snow groomer BISON
Operating and Maintenance Manual
BISON 908930245 - 30367
5 - Vehicle
41 (255)
5.2.2