DANGER
Risk of crushing
If the driver's cab is lowered accidentally
►
Do not remain in the area of the driver's cab when lowering.
The driver's cab can only be lowered using the push-button located under the right maintenance flap.
To lower the driver's cab, proceed as follows:
1. Ignition key position: ON
2. Compress the safety rod spring and remove it from the holding block of the accessory support
frame.
3. Fold the safety rod (1) under the cab and
compress the spring again to lock the de-
vice into the stowed position.
4. Press on the lower part of the push-button
(1): the driver's cab lowers.
5. After lowering keep the push-button pressed for approx. 10 s (until the sound changes): the
driver's cab is automatically secured.
6. Check the left and right driver's cab locking. Ensure the icon of "unlocked driver's cabin" on the
display is not showing.
Operating and Maintenance Manual
Snow groomer BISON
42 (255)
5 - Vehicle
BISON 908930245 - 30367
To Next Page
Loading...