PETU and Aftertreatment identification plates
Identification plate, component designation and serial number
■ The
identification plate is located underneath the support
structure of the unit.
Location of the identification plate
■ The
identification plate is located behind the dosing compo-
nents.
Location of the identification plate
Operating fluids
CAUTION
Fire hazard
Operating fluids are highly flammable.
►
Fire, open flame and smoking are prohibited.
► Do not allow operating fluids to drip or splash onto electrical systems or hot surfaces.
► Immediately clean up any spilled fuel.
NOTICE
Risk of engine damage
Even very small dirt particles can cause engine damage and premature wear.
►
Ensure the utmost cleanliness when handling operating fluids.
Structural components and lubricants must be compatible with each other. Therefore, only brands
tested and approved by Caterpillar must be used.
Special
lubricant additives are not required. Use of special additives may negatively affect warranty
claims.
Operating fluids are:
■ Diesel fuels
■ Lubricants, such as engine and gear oils, hydraulic oil, greases
■ Antifreeze, coolant
Snow groomer BISON
Operating and Maintenance Manual
BISON 908930245 - 30367
10 - Engine system
141 (255)
10.8
■
10.9
To Next Page
Loading...