■ Before
transporting, the packaging and containers should be labelled clearly, legibly and in a
weather-resistant way with the following information:
□ Hazardous material
□ Name and description of contents
□ Hazard category and number
□ Sender (name, signature and department)
□ Date
■ Old content information or supplier labels on the containers must be removed or made illegible to
avoid ambiguity. Containers should be rinsed before being filled with waste materials. The only
exception to this requirement is if the original cask or container was filled with the same waste
fluid.
Transporting waste
■ Only correctly packaged, sealed and labelled containers, or alternatively containers approved by
the environmental officer, may be taken to the waste disposal site (waste separation).
■ PCB-based synthetic oils or substitutes containing halogen, particularly those used in transform-
ers, condensers and hydraulic systems, must be collected and transported separately from other
waste oils when disposing of lubricants in order to comply with the local legislation.
Scrapping
■ Vehicle components and attachments must be disposed of in accordance with the relevant legal
requirements.
Operating and Maintenance Manual
Snow groomer BISON
202
(255)
14 - Storing and taking the vehicle out of service
BISON 908930245 - 30367
To Next Page
Loading...