■ Use either the left or right accelerator ped-
al installed depending on the position of
the driver seat.
If the electric motor fails, the postion of the driver seat can be changed manually: Slide the seat man-
ually
to the left or right so that the locking screw (2) can be placed in the threaded hole (3). To lock the
seat, push the screw and turn it clockwise into the thread (To remove the screw, turn counterclock-
wise).
Snow groomer BISON
Operating and Maintenance Manual
BISON 908930245 - 30367
5 - Vehicle
47 (255)
To Next Page
Loading...