-128-
GE06: Print Skew
GE06 presents as an untended skewing of the body of print. i.e., the print is crooked
on the page.
Cause
This defect results from various issues of paper path handling.
Solution
1. Remove ay paper jam.
If not resolved, continue to the next step.
2. Check the media feeder.
If not resolved, continue to the next step.
3. Check the paper path sensors.
If not resolved, continue to the next step.
4. Check whether the media being used is too slippery or too heavy.
5. If not resolved, contact customer service and report error code GE06-04: Print skew
unresolved.
To Next Page
Loading...
Need help?
General