Printing Innovation iCUBE 1 User Manual

-20-
3.4. Connecting the iCUBE
Make sure the printer is used with the mains cable suited to the requirements of the
electrical system of your country. The internal power supply in the printer is rated 115 to
240VAC, 50/60 Hz.
 Insert the cable into the printer first. The cable connector should sit in the socket
securely.
 Insert the cable into the mains socket.
CAUTION
Do not use an outlet that shares the same circuit with large electrical machines or
appliances
Turning Power On/Off
Powering Up:
Turn on the mains-switch

Printing Innovation iCUBE 1 Specifications

General

Brand	Printing Innovation
Model	iCUBE 1
Category	Label Maker
Language	English