-57-
6. Fold the cloth between wipes to ensure a clean, uncontaminated surface is used
each time.
7. Use a vacuum cleaner if necessary to remove debris inside and outside surfaces of
the clamshell.
5.2.2. Bi-Weekly Maintenance Tasks
Aerosol and debris removal
• Paper path optical sensor cleaning
• Wiper inspection
Aerosol and debris removal – see at daily maintenance tasks
Optical Sensor Cleaning
Clean the four optical sensors in the paper path every two weeks.
1. Pinch the clamshell latch to release and open the clamshell.
To Next Page
Loading...
Need help?
General